- Residential floors
- Commercial floors
- Industrial Resin
- Wall Finishes
- Get Quote
If you are looking to add colour and style to your garage, then the best place to start is with the floor.
Garage floor should be functional, easy to maintain, easy to clean, dust-free and mold-free.
We can offer a range of seamless garage flooring solutions, based on your needs, in a wide range of colours, thickness and strength.
Before installing a floor finish, the substrate should be well prepared, stable, smooth and free of cracks. If the floors need to be repaired/ made smooth, we can undertake the floor preparation works. On concrete bases, we’ll install 5-50 mm levelling compound reinforced with fibre glass mesh. For wooden substrates, we need to apply 1-2 layers of cement boards or water-resistant plywood to achieve a stable, free of movements sub-floor.
Epoxy Coating can be applied at different thicknesses and in a number of coats.
Option 1: Concrete Seal Coating is a cost effective way of sealing the dusty concrete. The coating is applied in 2 coats, making your floor dust free and easier to clean. It offers an industrial look, less attractive finish, showing all the small irregularities of your floor. The coating is roller applied, just like floor paint. There may be visible pin holes on the surface, but these will not affect the functionality of the floor. The finish is high gloss and comes in a range of standard colours.
Option 2: Epoxy Coating @ up to 0.5 mm is applied in 3 coats. It is also called High Build Epoxy Coating. This epoxy coating is squeegee and roller applied. It will leave a nice industrial look on the surfaces. It is dust free and easy to clean, with a higher strength comparing to the Concrete Seal Coating.
High Build Epoxy Coating is often applied in public garages and warehouses. It is gloss and becomes matt if slip resistant aggregates are used.
Option 3: Epoxy Coating @ 1-2 mm/ or 2-3 mm is a medium to hard wearing floor finish applied on old and new substrates. It can only be applied on stable sub-floors, like concrete and other cement based surfaces. The floor looks truly luxurious and stylish, with a mirror effect that reflects the lights and the object around.
Epoxy Coatings come in a range of colours that can be mixed, or roller applied to achieve a beautiful bespoke garage floor finish. Bespoke epoxy floors are suitable for luxury private and public garages, for workshops or retail shops. Bespoke epoxy coating is applied at 2-3 mm nominal thickness. It leaves a smooth gloss surface.
If you are looking for a hard wearing and scratch resistant decorative finish for your private garage, then the MMA Flake system is the right choice.
MMA Flake system comes in a range of flake colours, which can be Unicolour, standard blend of colours or a bespoke blend of colours.
The system is thick and can be installed on new or old cement based substrates. When installed on a wooden substrate, additional preparation may be required.
MMA Flake system is also suitable for restaurants, supermarkets, outdoor patios, shops, etc.
PU Screeds provide hygienic, chemical resistant and anti-slip flooring solutions that are hardwearing. The 4 mm PU screed system provides a matt self sealing finish. It is seamless and non dusting. PU screed comes in a standard range of colours.
Metallic epoxy floors offer a WOW factor to any garage interior. This decorative epoxy floor is of a medium duty strength, gloss or satin matt, installed at 1-3 mm thickness depending on how controlled you are looking the marble patterns to be. The thicker the metallic system is, the more luxury it looks. At the same time, the more coats are required – the higher the price for metallic floor becomes
Marble effect floors can be installed in a range of colour patterns. This bespoke design floor will always look different on different floors due to the irregular movement of the pigments in the clear epoxy coating.
|Concrete Seal||High Build Epoxy Coating||Epoxy Coating||Bespoke Epoxy Coating||MMA Flake System||Polyurethane Screed||Metallic Epoxy Coating|
|Thickness||100-150 microns (0.15 mm)||150 - 500 microns (0.5 mm)||
- 1-2 mm
- 2-3 mm
|2-3 mm||3-4 mm||4 mm||
The thicker it is, the most costly becomes, but the marble effects become more controlled
|FeRFA Type/ Strength||
Medium/ Heavy Duty
Medium/ Heavy Duty
Heavy Duty Wearing
|Number of Coats||2 coats||3 coats||
3 coats – for a smooth high gloss finish
4 coats – for a higher protection or a slip resistant finish
|4 coats||5 coats||2 coats||
3 coats – budget option. Pin Holes may be visible.
4 coats – the marble patterns are more controlled. High Gloss finish. Susceptible to scratches
5-6 coats – when a satin matt top coat is applied
|Finish||Gloss||Gloss||Gloss or satin||Gloss||Satin matt||Matt||Gloss or satin matt|
Garage Flooring Price* £/m2
Based on 50-100 m2
|30-40 £/m2||40-50 £/m2||
1-2 mm @ 60-70 £/m2
2-3 mm @ 80-90 £/m2
Price does not include a top coat sealer which is optional/ or required for an increased slip resistance
Over 90 £/m2.
Price is subject to the difficulty and time consumed on applying the required epoxy coating design.
|90-95 £/m2||65-80 £/m2||70-110 £/m2, based on required floor thickness|
|Installation time** (not including floor preparation)||2 days||3 days||4 days||5 days||2-3 days||2 days||3-6 days|
*Price per project is based on the floor size. The bigger the floor, the cheaper it is per square meter.
**Installation times may vary based on the floor size and floor plan.
*** Prices are excluding the VAT.
****All prices are approximate and based on a good quality substrate. Arrange a site survey to receive a quote for your project.